Home | Sitemap | Career    

  Valves built to last ™

IVC Metal Seated Sluice (Gate) Valve

IVC Sluice Valves characteristics
  • Robust & reliable (Scottish design)
  • Pressure rating upto PN 20 ( 50 to 1500 mm NB)
  • Suitable for Raw, Clear, Waste & Sea water
  • Tailor made for special applications and corrosive fluids
  • Minimal maintenance
  • General conformity to IS 14846 / BS EN 1171 / BS 5163
  • Flanges faced and drilled to IS 1538 table 4 & 6 / IS 6392 / BS EN 1092 – 2
  • Length Over Flanges: PD of IS 14846 / ISO 5752 Basic Series 3
  • Operation – Manual thru handhweel or gear box / Electrical / Pneumatic / Hydraulic
  NON RISING SPINDLE SLUICE VALVE              RISING SPINDLE GATE VALVE
IVC Metal Seated Sluice (Gate) Valve - Válvula       IVC Metal Seated Sluice (Gate) Valve - Válvula

Sluice Valve Major Component Material of construction
Body / Door / Dome / Cover /Bonnet Cast Iron / Ductile Iron / Cast Steel

Stool / Yoke / Adaptor

Cast Iron / MS fabricated

Spindle Stainless Steel: AISI 410 / AISI 431/ AISI 304 / AISI 316
Body seat / Door face Rings Gun metal LTB 2 / LG 2(2% Ni) / SS 304 (CF8)
Gland packing Greased hemp / CAF
Fasteners Carbon Steel / SS 304

IVC Sluice Valve Optional accessories:

  • Back Seat Bush – Gun metal – 200mm ø and above (for re-packing under pressure)
  • Shoe & Channel – Gun metal / SS 304 – 400mm ø and above (not recommended for sewage duty)
  • Ball thrust bearings – 400mm ø and above sluice valves
  • Gear Box – "Mastergear India" make enclosed spur / worm / bevel with or without Mechanical Position Indicator – 200 mm ø and above
  • Drain Plug – for 400mm ø and above sluice valves
  • By – pass arrangement(400mm ø and above sluice valves)                                
  • Head stock operation (CL of water way – PL of platform to be furnished by the purchaser)   
  • Chain wheel operation 

Copyright | Terms and Conditions | Privacy Policy