IVC Metal Seated Sluice Gate Valve

Valves built to last ™

IVC Sluice Valves characteristics

Robust & reliable (Scottish design)
Pressure rating upto PN 20 ( 50 to 1500 mm NB)
Suitable for Raw, Clear, Waste & Sea water
Tailor made for special applications and corrosive fluids
Minimal maintenance
General conformity to IS 14846 / BS EN 1171 / BS 5163
Flanges faced and drilled to IS 1538 table 4 & 6 / IS 6392 / BS EN 1092 – 2
Length Over Flanges: PD of IS 14846 / ISO 5752 Basic Series 3
Operation – Manual thru handhweel or gear box / Electrical / Pneumatic / Hydraulic

NON RISING SPINDLE SLUICE VALVE RISING SPINDLE GATE VALVE

Sluice Valve Major Component	Material of construction
Body / Door / Dome / Cover /Bonnet	Cast Iron / Ductile Iron / Cast Steel
Stool / Yoke / Adaptor	Cast Iron / MS fabricated
Spindle	Stainless Steel: AISI 410 / AISI 431/ AISI 304 / AISI 316
Body seat / Door face Rings	Gun metal LTB 2 / LG 2(2% Ni) / SS 304 (CF8)
Gland packing	Greased hemp / CAF
Fasteners	Carbon Steel / SS 304

IVC Sluice Valve Optional accessories:

Back Seat Bush – Gun metal – 200mm ø and above (for re-packing under pressure)
Shoe & Channel – Gun metal / SS 304 – 400mm ø and above (not recommended for sewage duty)
Ball thrust bearings – 400mm ø and above sluice valves
Gear Box – "Mastergear India" make enclosed spur / worm / bevel with or without Mechanical Position Indicator – 200 mm ø and above
Drain Plug – for 400mm ø and above sluice valves
By – pass arrangement(400mm ø and above sluice valves)
Head stock operation (CL of water way – PL of platform to be furnished by the purchaser)
Chain wheel operation